1) Construction:
Internal rubber-based tube for hydrocarbons and alcohols, constructed with multiple textile layers for tensile and torsional reinforcement. Includes a built-in steel spiral for greater resistance to twisting. Equipped with a grounding wire for electrostatic dissipation.

Electrically discontinuous hose.
Working Pressure: Up to 25 bar
Test Pressure: 1.5 times the working pressure
Temperature Range: -20 °C to +82 °C
Safety Factor: 5:1 (Note: "1:5" likely means 5:1 safety factor, i.e., burst pressure is 5x working pressure)
Vacuum Resistance: 0.7 Bar at room temperature
Ends with ANSI 150lb flanges (fixed and swivel)

2) Characteristics: Airtight, Conductive, Low-temperature resistant, Ozone resistant.
3) Application: Handling petroleum products containing up to 70% aromatics at terminals, on ships, and barges.
4) Single foam flotation sleeve to prevent water absorption.
5) High abrasion resistance, easy installation, good adhesion, long service life, easy assembly.

Color, dimensions, thickness, pressure, and length can be customized.

Notes on the Translation

1.3/11: The meaning of "3/11" in the flange material column is unclear from the context. It might refer to a specific flange facing (e.g., raised face RF number) or a standard, but this is not standard notation. It's best to confirm its meaning from the original source or manufacturer.

2.400 mm ID: 400 mm is closer to 16 inches than 15 inches. The table lists "15", which might be a specific nominal size label rather than the exact conversion.

3.800 mm ID: 800 mm is closer to 31.5 inches, but 32 inches is a common nominal pipe size.

4.1000 mm ID: 1000 mm is closer to 39.37 inches, but 40 inches is a common nominal size.

5.Pressure Columns: The header for the pressure columns is unclear ("压力", "酒吧", "M"). Based on the values (10 and 20 bar) matching the working and test pressures mentioned earlier (25 bar max WP * 1.5 = 37.5 bar test, so these values might be for specific sizes or conditions, or the 25 bar is a maximum, not for all sizes), I've interpreted them as likely representing Working Pressure and Test Pressure for these specific sizes, noting they differ from the general specs. The "M" column header's meaning is unknown.

6.ANSI 150L: Translated to ANSI 150lb (pound rating), which is the standard designation.

7.Single foam flotation sleeve: This suggests the hose might be intended for use on water (like for bunkering or offshore loading) and includes a sleeve to keep it afloat.

8.High abrabisionm: Corrected to "High abrasion resistance".

Key Attributes

Flexible Industrial Hose with Airtight Construction and Conductive Properties for Safe Handling of Petroleum Products Images